E3SB24E00004GE
Manufacturer: Hosonic
The E3SB24E00004GE is a 24 MHz surface-mount crystal in a 3225 package. 24 MHz is a common reference for USB-capable microcontrollers and for radio ICs that divide it down to a channel frequency, which makes this part a general-purpose clock reference rather than a niche product.
Overview
The E3SB24E00004GE is a 24.000000 MHz SMD crystal from Hosonic in the 3225 seam-sealed outline. The datasheet specifies a frequency tolerance of ±10 ppm at 25 ±3 °C and a stability of ±20 ppm over the operating range of -40 to +85 °C, referenced to 25 °C. Load capacitance is 12 pF, equivalent series resistance is 50 Ω maximum, and the specified drive level is 100 µW typical with a 200 µW maximum.
Aging is quoted at ±2 ppm in the first year, with shunt capacitance below 3 pF and insulation resistance above 500 MΩ. The part is aimed at USB, display and general clock references in consumer and industrial boards that need a stable 24 MHz fundamental crystal with a defined load capacitance.
Key features
- 24 MHz suits USB-capable MCU and radio IC references
- 3225 package is a widely second-sourced footprint
- ±10 ppm tolerance suits general serial and USB timing
Typical applications
- MCU and SoC clock reference
- USB device timing
- Consumer electronics clock generation
Specifications
Frequency
| Nominal frequency | 24 MHz |
|---|---|
| Load capacitance | 8 pF |
| Frequency tolerance | ±10 ppm |
Mechanical
| Package | 3225 (3.2 × 2.5 mm) |
|---|
Note on parameters. The figures above are taken from the manufacturer datasheet for E3SB24E00004GE. Electrical limits vary by ordering option and revision — confirm the current datasheet before finalising your design.
Package and ordering
| Ordering code | Package | Operating temp. / grade |
|---|---|---|
| E3SB24E00004GE | 3225 (3.2×2.5 mm) | Tape & reel |
Alternative and comparison parts
Designs that evaluate this part usually compare it against the following:
Related products
Sourcing E3SB24E00004GE
We supply E3SB24E00004GE with original manufacturer documentation and a quotation that states lead time, packaging and price breaks. Send your annual quantity and target date and you will get a reply with the datasheet attached.